Nitro-Explosives: A Practical Treatise by P. Gerald Sanford
page 97 of 352 (27%)
page 97 of 352 (27%)
![]() | ![]() |
|
|
safe.
In order that the final product may be stable and have good keeping qualities, it is necessary that it should be washed completely free from acid. The treatment in the beater and poacher, by causing the material to assume the state of a fine pulp, in contact with a large quantity of water, does a good deal to get rid of the free acid, but the boiling process is absolutely necessary. It has been proposed to neutralise the free acid with a dilute solution of ammonia; and Dr C.O. Weber has published some experiments bearing upon this treatment. He found that after treatment with ammonia, pyroxyline assumed a slightly yellowish tinge, which was a sure sign of alkalinity. It was then removed from the water, and roughly dried between folds of filter paper, and afterwards dried in an oven at 70° C. After three hours, however, an explosion took place, which entirely destroyed the strong copper oven in which the nitro- cotton (about one oz.) had been drying. The explosion was in some respects remarkable. The pyroxyline was the di-nitro-cellulose (or possibly the penta-nitro?), and the temperature was below the igniting point of this material (40° C. would have been a better temperature). Dr Weber determined the ignition point of his di-nitro-cellulose, and found it to be 194° to 198° C., and he is therefore of opinion that the explosion was due to the treatment of the partially washed material with ammonia. A certain quantity of ammonium nitrate was probably formed, and subsequently dried upon the nitro-cellulose, in a state of very fine subdivision. The faintest trace of acid would then be sufficient to bring about the explosive ignition of the ammonium nitrate. The drying of gun-cotton or collodion-cotton is also a somewhat dangerous operation. A temperature of 40° C. (104° F.) should not be exceeded, and thermometers should be placed in the nitro-cotton, and the temperature |
|


