Book-bot.com - read famous books online for free

Oxy-Acetylene Welding and Cutting - Electric, Forge and Thermit Welding together with related methods - and materials used in metal working and the oxygen process - for removal of carbon by Harold P. Manly
page 72 of 185 (38%)

_Location of Generators._--Generators should preferably be placed
outside of insured buildings and in properly constructed generator houses.
The operating mechanism should have ample room to work in and there should
be room enough for the attendant to reach the various parts and perform the
required duties without hindrance or the need of artificial light. They
should also be protected from tampering by unauthorized persons.

Generator houses should not be within five feet of any opening into, nor
have any opening toward, any adjacent building, and should be kept under
lock and key. The size of the house should be no greater than called for by
the requirements mentioned above and it should be well ventilated.

The foundation for the generator itself should be of brick, stone, concrete
or iron, if possible. If of wood, they should be extra heavy, located in a
dry place and open to circulation of air. A board platform is not
satisfactory, but the foundation should be of heavy planking or timber to
make a firm base and so that the air can circulate around the wood.

The generator should stand level and no strain should be placed on any of
the pipes or connections or any parts of the generator proper.




CHAPTER IV

WELDING INSTRUMENTS


DigitalOcean Referral Badge